What is the reason for brake disc shaking? How to solve it

       Brake disc shaking is one of the common problems in the use of automobiles, which not only affects driving comfort but may also pose a threat to driving safety. The following are common causes and solutions for brake disc shaking:
       1、 Reasons for brake disc shaking
       Uneven wear on the surface of the brake disc:
       Long term use can cause uneven surfaces on the brake disc, resulting in shaking during braking.
       Frequent sudden braking or hard brake pad material can also accelerate uneven wear of the brake disc.
       Brake disc deformation:
       Encountering strong impacts during vehicle operation or quality issues with brake disc manufacturing may result in brake disc deformation.
       Uneven wear of brake pads:
       The uneven wear of brake pads can cause uneven pressure distribution during braking, leading to shaking.
       Wheel hub issue:
       Deformation or imbalance of the wheel hub can affect the normal operation of the brake disc, leading to shaking.
       Improper installation:
       Incorrect installation (such as screws not tightened) when replacing brake discs or brake pads may cause shaking.
       Other components of the brake system malfunction:
       Brake caliper piston sticking, poor return of brake cylinder, etc. can cause uneven braking force and vibration.

       2、 Solution to brake disc vibration
       Check and repair brake discs:
       Slight wear: The flatness of the brake disc surface can be repaired by polishing (disc).
       Severe wear or deformation: New brake discs need to be replaced.
       Replace brake pads:
       Ensure even wear of brake pads and replace them if necessary.
       Repair or replace the wheel hub:
       For deformed wheels, repair or replacement is required.
       Check and repair other components of the brake system:
       Check the brake caliper, brake cylinder and other components, and repair or replace them in a timely manner if there are any faults.
       Reinstall brake components:
       Ensure that the brake discs and brake pads are installed correctly and securely.
       Check the tires and suspension system:
       Regularly check tire pressure, tire wear, and suspension system components to ensure their normal operation.
       3、 Daily maintenance suggestions
       Regularly check the brake system: check the wear of brake discs and brake pads every 10000 to 20000 kilometers.
       Keep the brake system clean: Avoid dust, mud, and other impurities from entering the brake system.
       Proper use of brakes: Avoid frequent sudden braking and reduce wear and tear on the braking system.
       Timely replace brake oil: Brake oil has water absorption properties, and it is recommended to replace it every 2-3 years.
       Avoid overloading: Overloading will increase the burden on the brake system and accelerate its wear and tear.
       In short, the problem of brake disc shaking cannot be ignored. Timely identification of the cause and effective solutions should be taken, while paying attention to the daily maintenance of the brake system, in order to ensure driving safety and make driving more reassuring.